Відео

What was the brand of that blue cap? Many companies use that blue color. Even F&T has dual can caps in that color. But I can't believe that F&T would die in 5 years. I use them in most of my amplifiers and I haven't seen any issues yet. They measure at or above the given value. ESR is always good. Though last batch of 50 + 50 500V I got sections are more apart then before. One side has higher capacitance and better ESR than the other. Still way in the tolerance and at positive side. But old batch was having more alike values. One cap would be better than others in the old batch but they were all above stated values. 32 + 32 were very similar between sections and between each other. Their single caps were even more consistent for me.

Few years ago there was a Marshall PA head for reasonable price in the music store in the other city. It looked very similar to that one. I was like score, if it has proper irons it’s a gold. Plus so many channels that must mean lot of preamp tubes and other goodies. Then I saw inside pictures and that was it. Disaster. Plus no way near what I thought it will be. Way less parts and modified and worked on. Looked very sad and I just decided not to get it. Something cheaper than it should be is often just almost junk. It’s nice t easy to get those good deals.

Is it "Amp-->Two Notes"OPUS"-->Loadbox-->Speaker OR...............................Is it "Amp-->Loadbox-->OPUS-->Speaker? And finally what jacks use (speaker cable)?? Thank you so much for your help in advance because I am "dead in the water" ntil i know the safe way to cable this

Dude you crushed it

Great Video !!!!!!!!!!!!!!!!!!!!! Joe. I have a question. ON the FRYETTE website you sell COLOR CODED speaker cables for the POWER STATION. are these standard speaker cables or necessary for the use of the PS-100 ???????? THX !!!!!!!!!!!!!!!

How about running a GPDI through a Power Station? Can we hear that?

Not good enough Mr Fryette your amps all seem to have little gremlins and problems straight out of the box. Where's the QC on your amps mate ? You don't have these problems with Marshall or others yet your amps have problems new from the shop ???? Overrated product and Overpriced not impressed at all, since buying a NEW 2/90/2 nothing but problems. My old Marshall mono block is still kicking arse after 25yrs.

The best I've heard you sound Joe. The tone and playing and song writing. Great stuff.

Whoa!! You killed it!! 🎉. That was the most tight and awesome demo video I’ve ever seen!!! Much love!! ❤

awesome Joe! Sounds incredible.

I just bought a PS-100 after watching your demos. Now I’m seriously considering the Deliverance head.😅

Dang Joe, you absolutely snapped on this song!! That main wammy bar lick is still stuck in my head a day later. 🤘🤘

Does the effects loop,goes through the xlr or unbalanced output to have your effects in recording in ps100 ?

Right on Joe!

SOB! That sounds great. Killer playing. Great work.

That sounds awesome! Nice work! Cheers!

Great tune, playing and tones!

Absolutely wOW From Stevie Ray's low ends to MOnster crunch to beautiful lead tones , well done ! And your playing is superb !

Where did you get that little rack case for the PS-100? Demo sounds great!

Great playing and tone. Well done!

Incredible tones, incredible playing !!

GREAT VIDEO !!!!!!!!!!!!!!!!!!! Every note sounds so clear !!!!!!!!!!!!!!!!!!!!!!! WOW !!!!!!!!!!!!!!!!!!!

Love the single setting approach. Thx Joe, sounds thick and pointy ; )

Great playing and tones, I’m super inspired to pick up my guitar and plug in. 👍🏻

That’s the best demo I’ve heard thusfar

You undersell your playing, love it

That sound GREAT!

Love the playing!

Can I survive with a ps2 and not be able to switch effects loop on & off?

Awessome Video !! Killer Hamer too!!!!

To FRYETTE: I have a PS100(which I love) HOWEVER:: I was wondering If the cyclops in ANY way solves the problem of Not being able to hear the Effects in the effects loop in the outgoing "line out" (either balanced or unbalanced) that goes to the DAW. You stated that the "effects loop" is AFTER the "line out" Thereby nullifying any effects in the loop. So the only way I can see around this is: Going from the "Balanced line out into the input of the effects chain...then from the effects chain out, into the DAW...Is that about it???

To FRYETTE: I have a PS100(which I love) HOWEVER:: I was wondering If the cyclops in ANY way solves the problem of Not being able to hear the Effects in the effects loop in the outgoing "line out" (either balanced or unbalanced) that goes to the DAW. You stated that the "effects loop" is AFTER the "line out" Thereby nullifying any effects in the loop. So the only way I can see around this is: Going from the "Balanced line out into the input of the effects chain...then from the effects chain out, into the DAW...Is that about it???

thank you for this video so much!!!

I'll never understand techs who are hesitant to replace 40 year old electrolytic caps. Just replace it and be good another 40 years.

Thanks to the creator for breaking this down with no tacky up selling.

Ok thanks , so you ran your amp into the power station but didnt need to hook the power station up to a cab ? So you can use the power station as a load box and not need a cab ? Sorry i just ordered one and i didnt know that could be done i thought it had to be hooked to cab and use as an attenuator only . Am i correct that you can use it as load with no cab or am i missing somthing ? Either way great piece of gear steve is a genius! Thank you for any help

Sounds analogous to buying a new guitar, changing the tuners and strings and not turning the guitar when finished! 😩. Hope you follow this up with a video explaining how to bias a Friedman Plex 🤞❤️

Joe's been itching to play the Sig:X for some time from what I recall. Would love to see you guys fire it up on the show and A/B it the Deliverance or Pittbull!

Goddamn Steve, badass playing man! You make your Strat sound killer !

"my D is pretty low"

Love

1. is there a way to connect 2 tube preamps and switch between those versus a preamp and an actual amp head? 2. Can I use just one preamp with cyclops? I’m contemplating buying it so I can go into the line in of the power station and free up the effect loop since I’ve been going into the effects return of the PS2A direct from preamp.

The PRS So called Hendrix amp sounds very unimpressive to my ears.

Fryette amps are the GOAT. No apologies. Play one if you get a chance.

Is the headphone amp in the unit analog or digital? Thanks,...

As far as I am concerned, a smaller and lighter Deliverance is a Deliverance Synergy module in the Synergy SYN-30 head or the forthcoming SYN-20 head. Personally, I would rather run a SYN-1 chassis into a Fryette Power Station.

Will bad power tubes result in no volume in operate mode

Hello, when installing new pre amp tubes, what brand are you using these days....... I like your Hamer Guitar.............

I love the smell of hot tubes in the morning. In all seriousness, tube amps excite more of my human senses than just hearing. After playing a Pitbull, I found a top 3 most enjoyable life experience. Fryette Bass Guitar division when? 😂

Here is what is Bad Ass about this video folks... He Is Hot Switching The Speaker Output Between His Speaker and Load! And No Smoke Was Released In This Video...Damn Those Circuit Boards Are Sexy!